1/8″ TruFlat® Oak

Tired of dealing with warped wood? Not anymore!  Say hello to TruFlat® You’ll never have to struggle keeping wood flat EVER again.

 

• TruFlat® is Flat

With a tolerance of +/- 0.015″ over 19″, the best margin for any wood panel on the market, we guarantee this material will lay flat on your laser bed.

• EASY TO CUT

Whether you are using a Diode or C0² laser, a CNC, or a scroll saw – you’ll have no problems cutting through TruFlat® plywood with ease. Made from a defect free MDF this ensure a perfect cut every time.

• SUBLIMATE

TruFlat® plywood also works great for sublimation projects. Use the White for crisp and clean transfers, or Maple & Oak for a more vintage look!

• PRE-FINISHED BOTH SIDES

TruFlat® has a smooth acrylic coating applied to both sides. All you need is a quick wipe and your piece is done! No more spraying, or oiling on a finish to complete your project – it’s already done!

• NO MORE MASKING

After you score or engrave, you simply wipe on paint and wipe off! The pre-finish surface will wipe off clean leaving your color set in the MDF core.

 

USE THESE SETTINGS AS A STARTING POINT WITH YOUR LASER. EXPECT TO ADJUST AS NECESSARY.

TruFlat® Cut Settings

30W

• Engrave (Speed/Power) : 400/35
• Cut (Speed/Power) : 10 / 90

40W (GlowForge)

• Engrave (Speed/Power) : Full/Full
• Cut (Speed/Power) : ProofGrade Medium Draftboard

60W

• Engrave (Speed/Power) : 450/50/40
• Cut (Speed/Power) : 15 / 30 / 20

100W

• Engrave (Speed/Power) : 400/35
• Cut (Speed/Power) : 30 / 60

Sublimation

• We recommend starting at 385º for 45 seconds and adjust from there.
• Remember to do a test section first for best results!